Aminobenzenesulfonamide functionalized SBA-15 nanoporous molecular sieve: A new and promising adsorbent for preconcentration of lead and copper ions

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺ and Cu²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with aminobenzenesulfonamide groups and flame atomic absorption spectrometry (FAAS) is presented. Aminobenzenesulfonamide functionalized SBA-15 was synthesized according to procedure in the literature and the presence of organic groups in the silica framework was demonstrated by FT-IR spectra. The functionalized product showed the BET surface area 110 m²/g and pore diameter 5.1 nm, based on adsorption-desorption of N₂ at 77 K. The effect of several variables such as (amount of adsorbent, stirring time, pH and presence of other ions in the medium) has been studied. Lead and copper were completely extracted at pH greater than 3 after stirring for 10 min. The maximum capacity of the adsorbent was found to be 191.3 ± 1.4 and 155.0 ± 1.0 μg of lead and copper ions/mg functionalized SBA-15, respectively. The preconcentration factor of the method was found to be 200. The detection limit of the technique was 3.4 and 0.4 ng/mL for Pb²⁺ and Cu²⁺, respectively. The applications of this methodology for real samples were examined by various water type, black tea and pepper samples.     

Acute and chronic toxicity of nickel to nitrifiers at different temperatures

This study investigated the acute nickel toxicity on nitrification of low ammonia synthetic wastewater at 10, 23, and 35°C. The nickel inhibition half-velocity constants(K_(I,Ni)) for ammonia oxidizing bacteria(AOB) and nitrite oxidizing bacteria(NOB) based on Ni/MLSS ratio at 10, 23, and 35°C were 5.4 and 5.6 mg Ni/g MLSS, 4.6 and 3.5 mg Ni/g MLSS, and 9.1 and 2.7 mg Ni/g MLSS, respectively. In addition, chronic toxicity of nickel to nitrification of low ammonia synthetic wastewater was investigated at 10°C in two sequencing batch reactors(SBRs). Long-term SBRs operation and short-term batch tests were comparable with respect to the extent of inhibition and corresponding Ni/MLSS ratio. The μ_(max), b, and K_o of AOB were 0.16 day~(-1), 0.098 day~(-1) and 2.08 mg O_2/L after long-term acclimatization to nickel of 1 mg/L at 10°C, high dissolved oxygen(DO)(7 mg/L) and long solids retention time(SRT) of 63–70 days. Acute nickel toxicity of nitrifying bacteria was completely reversible.     

Book reviews

Planning in the Public Domain: From Knowledge to Action

John Friedmann. Princeton University Press, 1987, 501pp.

New Communities for Urban Squatters: Lessons from the Plan that Failed in Dhaka, Bangladesh

Charles L. Choguill, Plenum Press, New York 1987, pp. 213.

Models of Urban and Regional Systems in Developing Countries

George Chadwick, Oxford, Pergamon Press, 1987, xv +320pp.

Price: £17.50.     

Epidemiology of occupational accidents among Iranian insured workers

Work-related accidents are considered as a major health problem worldwide. The aim of present study was to determine the epidemiological pattern of occupational accidents among workers insured by the Iranian Social Security Organization (ISSO) between 2001 and 2005.Subjects consisted of all workers and drivers who had a work-related accident during 2001–2005 and were registered in the Iranian Social Security Organization (ISSO) database according to the inspection reports. An ordinal logistic regression model (proportional odds regression model) was used to assess the concurrent effects of independent variables on accident outcomes.Overall, 86,437 work-related accidents were investigated. The accidents were more frequent in metal workplaces and electrical industries, respectively. More than half of the accidents were due to incautious activities. Workers’ age (age at the time of accident) (OR = 0.99, CI: 0.989–0.994), gender (OR = 1.3, CI: 1.191–1.683), marital status (OR = 1.25, CI: 1.143–1.675) as well as accident setting (OR = 1.88, CI: 1.728–1.975) had significant effect on accident outcomes. Pattern of occupational injuries in Iran was consistent with the global pattern for accident outcomes.     

Decolorization and degradation of acid dye with immobilized titania nanoparticles

This paper addresses the decolorization and degradation of acid dye by a heterogeneous photocatalytic process using immobilized nano-sized TiO₂ particles as the photocatalyst. Sackcloth fiber was used as a support to immobilize the nano-sized TiO₂ photocatalyst. The structural properties of the immobilized photocatalyst were characterized by XRD, SEM and EDX. UV–Vis absorption spectroscopy and the measurement of the chemical oxygen demand (COD) were also used for the process performance studies. The XRD results did not show significant changes in the structure of P25 as a consequence of the immobilization procedure. The formation of titania crystallites in the sackcloth fiber was confirmed by SEM/EDX. The photocatalytic activities of TiO₂-coated sackcloth fiber catalyst were evaluated using Acid Black 26 as a model organic contaminant and using UV-A radiation. Experimental results showed that after 60 min, the degradation of Acid Black 26 with the immobilized TiO₂ particles was higher than that with plain TiO₂. Based on the COD results, after 3 h, the TiO₂-coated sackcloth fiber effectively decomposed all of the organic compounds present in dye solution under the studied experimental conditions. The effects of the oxidant H₂O₂, initial dye concentration and pH on the photocatalytic degradation were also investigated. The presence of CO₃^2? as a dissolved inorganic anion had the highest inhibitory effect on the decolorization of the dye, when compared with the other anions investigated. Kinetics analysis indicates that the photocatalytic decolorization rate of Acid Black 26 can be described by a pseudo-first-order model.     

Performance of Cow Dung Reinforced Biodegradable Poly(Lactic Acid) Biocomposites for Structural Applications

In this work, performance of cow dung (CD) reinforced poly(lactic acid) (PLA) biocomposites was investigated for the potential use in load bearing application. CD of average 4 mm size was blended with PLA at different CD ratios (0–50 wt%) and their effects on the biocomposite properties were studied. The results showed an improvement in the flexural properties, while the tensile and impact strength dropped by 20 and 28% with the addition of 50% CD. The decline in the tensile and impact strength was due to micro-cracking and voids formation at higher CD content. Also, the incorporation of CD slightly decreased the thermal stability of the biocomposite. However, dynamic mechanical properties of the biocomposites generally improved. SEM analysis of tensile and impact fractured surfaces indicated that the CD had a reasonable adhesion with matrix. Moreover, the SEM micrographs of soil burial studies showed an accelerated degradation of higher CD wt% biocomposites.     

A Solvent-Free Approach for Production of Films from Pectin and Fungal Biomass

Self-binding ability of the pectin molecules was used to produce pectin films using the compression molding technique, as an alternative method to the high energy-demanding and solvent-using casting technique. Moreover, incorporation of fungal biomass and its effects on the properties of the films was studied. Pectin powder plasticized with 30% glycerol was subjected to heat compression molding (120 °C, 1.33 MPa, 10 min) yielding pectin films with tensile strength and elongation at break of 15.7 MPa and 5.5%, respectively. The filamentous fungus Rhizopus oryzae was cultivated using the water-soluble nutrients obtained from citrus waste and yielded a biomass containing 31% proteins and 20% lipids. Comparatively, the same strain was cultivated in a semi-synthetic medium resulting in a biomass with higher protein (60%) and lower lipid content (10%). SEM images showed addition of biomass yielded films with less debris compared to the pectin films. Incorporation of the low protein content biomass up to 15% did not significantly reduce the mechanical strength of the pectin films. In contrast, addition of protein-rich biomass (up to 20%) enhanced the tensile strength of the films (16.1–19.3 MPa). Lastly, the fungal biomass reduced the water vapor permeability of the pectin films.     

Investigation of the association between pesticide exposure and the prevalence of type 2 diabetes in Shahedieh population in Yazd

Environmental Science and Pollution Research - This study aimed to investigate the effect of exposure to pesticides and the prevalence of type 2 diabetes (T2D). In a cross-sectional study with a...     

Daily dietary intakes of zinc,copper, lead,and cadmium as determined by duplicate portion sampling combined with either instrumental analysis or the use of food composition tables,Shiraz, Iran

Estimation of essential and toxic element intakes is crucial to evaluate the risks of deficiency or toxicity. The purpose of this study was to investigate and also to compare the dietary intakes of zinc (Zn) and copper (Cu) by adults living in Shiraz, Iran, determined by two procedures: duplicate portion sampling of 21 hospital meals combined with either instrumental analysis (voltammetric measurement) or the use of food composition tables (FCTs). The level of exposure to lead (Pb) and cadmium (Cd) was evaluated as well. The daily Zn intakes of both methods were not significantly different and were higher than the RDA values except the value measured by the instrumental analysis which was lower than the RDA established for a male adult. Daily intake of Cu determined by instrumental analysis was significantly lower and closer to RDA for adults compared with the value estimated by FCTs. The dietary intakes of Pb and Cd were 313 and 61 % of the respective provisional tolerable weekly intakes (PTWIs), respectively. The accuracy of two methods used for estimation of Zn intake was similar. In the case of Cu, the use of FCTs, in which the influence of environmental conditions and dietary habits of meal preparation is not taken into account, overestimated dietary intake. The risk of zinc deficiency was found in adult males. Moreover, the estimated intake of Pb, but not Cd, could be a cause of concern for Shiraz population. Thus, conducting regular periodic studies to assess the dietary intake of mentioned elements are recommended.     

Synthesis,Characterization and Environmental Applications of a New Bio-Composite Gelatin-Zr(IV) Phosphate

Gelatin-Zr(IV) phosphate composite (GT/ZPC) was synthesized by sol–gel method. Different techniques viz. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray powdered diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for the characterisation of GT/ZPC composite ion exchanger. The ion exchange capacity (IEC) of GT/ZPC was observed to be better (1.04 meq g^?1) than its inorganic counterpart (0.64 meq g^?1). The pH studies revealed the monofunctional nature of GT/ZPC with one inflection point. The distribution studies showed that the GT/ZPC was highly selective for Cd²⁺ as compare to other metal ions. The environmental applicability of ion exchanger has been analysed for binary separations of metal ions using column method. Cd²⁺ was effectively removed from synthetic mixture of metal ions (Zn²⁺, Pb²⁺, Ni²⁺, Co²⁺ and Cu²⁺).